Emerson KJ3241X1-BA1 SERIAL INTERFACE MODULE REDUNDANT 12 VDC 300 MA
Product information Emerson KJ3241X1-BA1 :
The standard configuration of the Ovation Remote I / 0 Subsystem requires fiieoptic cables ( with ST connectors ) to connect the MAU to a remote node .For 850 nm optics , distances of up to 2 km are supported between the remote nodeand the Controller or a repeater ( up to two repeaters per communications linkor 1300 nm optics , distances of up to 4 km are supported between the remote nodeand the ControllerThe MAU module is ocated in an Ovation KJ3241X1-BAL Controller cabinet or in a maratWDPF DPU cabinet .
The MAU plugs into a special base unit which canaccommodate up to two modules per base . The base unit clamps onto the DIN railke standard / 0 module basesMAU 1 and MAU 2 are two KJ3241X1-BAL separate MAU modules which may be locatedanywhere in the Controller cabinet . One Aul cable connects MAU 1 to P1 on thePCRR and a second Aul cable connects MAU 2 to P2 on the PCRR
This cable allows the KJ3241X1-BAL user to expand local I / 0 to additional branches by daisychaining connections between either the Controller backplane or Remote NodeController Transition panel and additional local l / 10 Transition panelsength : 9 . 1 meters maximum ( 30 ft )The PCRR and Media Attachment Module are connected via an Aul cable . Thiscable meets the electrical specifications stated in the KJ3241X1-BAL ANSI / IEEE 802.3 standard foocal Area Networks . The cable should be long enough to reach the length of the
This module has 16 digital outputs. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature.
The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier.
The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read through the ModuleBus. The outputs are current limited and protected against over temperature. If the outputs are overloaded the output current will be limited.
| Model |
Mechanics |
Type |
| AI801 |
S800L |
Analog Input |
| AI810 |
S800 |
Analog Input |
| AI815 |
S800 |
Analog Input |
| AI820 |
S800 |
Analog Input |
| AI825 |
S800 |
Analog Input |
| AI830A |
S800 |
Analog Input |
| AI835A |
S800 |
Analog Input |
| AI843 |
S800 |
Analog Input |
| AI845 |
S800 |
Analog Input |
| AI880A |
S800 |
Analog Input |
| A1890 |
S800 |
Analog Input |
| AI893 |
S800 |
Analog Input |
| AI895 |
S800 |
Analog Input |
| AO801 |
S800L |
Analog Input |
| AO810V2 |
S800 |
Analog Output |
| AO815 |
S800 |
Analog Output |
| AO820 |
S800 |
Analog Output |
| AO845A |
S800 |
Analog Output |
| AO890 |
S800 |
Analog Output |
| AO895 |
S800 |
Analog Output |
KJ3241X1-BA1 's details:
Extend :
TU814V1(3BSE013233R1):16 channels for 24 V d.c. inputs with current sourcing 2 Isolated groups of 8 with voltage supervision
Note: Use with I/O → AI810, AI815, AI820, AI830, AI835A, AI835, AI845, AO810, AO810V2, AO815, AO820, AO845, AO845A, DI810, DI811, DI814, DI830, DI831, DI840, DI880, DI885, DO810, DO814, DO815, DO840, DO880, DP820 and DP840.
TU850 (3BSE050930R1) : Complete 2-wire connections for up to 16 channels.
Note: 40 up to 16 I/O channels , 16 current limited sensor/transmitter power outlets, D-sub connectors 25 pin (male).
TU838 ( 3BSE008572R1) : Complete installation of I/O modules using 3-wire connections,fuses and field power distribution.
Note: 40 , up to 16 I/O channels, 8 fused sensor power outlets, 4 Process power, 12 Process power.
Our brand:
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
3, We can according to your shipment to ship out the goods, Or we also can help you to ship out the goods directly. And the tracking number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5 days.
5. If you also have any questions, you can ask me any time, right below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
Your message must be between 20-3,000 characters!
