1746-P2 AB SLC 500 Rack Mount Power Supply 120/240V AC 5A Series C

1746-P2 AB SLC 500 Rack Mount Power Supply 120/240V AC 5A Series C

Quick Details

OTHER SUPERIOR PRODUCTS

System Wiring Guidelines
Use the following guidelines in planning the system wiring for the analog modules:

• all analog common terminals (ANL COM) are electrically connected inside the module. ANL COM is not connected to earth ground inside the module.

• voltages on IN+ and IN- terminals must remain within ± 20 Volts with respect to ANL COM to ensure proper input channel operation. This is true for current and voltage input channel operation.

• voltage outputs (OUT 0 and OUT 1) of the NIO4V and NO4V are referenced to ANL COM. Load resistance (R1) for a voltage output channel must be greater than or equal to 1K ohms.

• current output channels (OUT 0 and OUT 1) of the NIO4I and NO4I source current that returns to ANL COM. Load resistance (R1) for a current output channel must remain between 0 and 500 ohms. After the analog input module is properly installed in the chassis, follow the wiring procedure below using Belden 8761 cable.

FAQ
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.

Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.

Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.