ABB 3BSE028602R1 DO880 S800 I/O Digital Output HI S/R 16ch Module

 ABB 3BSE028602R1 DO880 S800 I/O Digital Output HI S/R 16ch Module
  
Product Information Of : 3BSE028602R1 DO880

    The DO880 is a 16 channel 24 V digital output module for single or redundant application. The maximum continuous output current per channel is 0.5 A. The outputs are current limited and protected against over temperature. Each output channel consists of a current limited and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and an isolation barrier to the Modulebus.

General info :

Article number : 3BSE028602R1 

Catalog Description : DO880 Digital Output HI S/R 16 ch

Type Designation : DO880

Type : Digital Output

Number of channels : 16

Signal specification : 24 V d.c. (19.2 - 32 V d.c.), 0.5 A

Signal type : Current sourcing, current limiting

Mechanics : S800

Isolation : Groupwise isolated from ground

Rated insulation voltage : 50 V
Dielectric test voltage : 500 V a.c.

Minimum Order Quantity : 1 piece

Order Multiple : 1 piece

Technical :   

1, 24V d.c., 0,5A Outputs. High integrity, certified for SIL3. Single or redundant. Requires configuration according to Safety Manual.
2, Use Module Termination Unit TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU852

Features and benefits :

1, 16 channels for 24 V d.c. current sourcing outputs in one isolated group
2, Redundant or single configuration
3, Loop monitoring, supervision of short and open load with configurable limits (see table Table 97).
4, Diagnostic of output switches without pulsing on outputs
5, Advanced on-board diagnostics
6, Output status indicators (activated/error)
7, Degraded mode for normally energized channels (supported from DO880 PR:G)
8, Current limitation at short circuit and over-temperature protection of switches

Categories : 

Products » Control System Products » I/O Products » S800 I/O » S800 I/O - Modules » DO880 Digital Outputs » DO880 Digital Output

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
   Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
   We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
   We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
   The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:  

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.