GE Series 6 Receiver Board DS3800HXRA for quick installation in the drive

GE Series 6 Receiver Board DS3800HXRA  for quick installation in the drive

Product Description
The GE Series 6 Receiver Board DS3800HXRA is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE Series 6 Receiver Board DS3800HXRA also is populated with 2 40-pin connectors between the retention levers. The board is also populated with 1 34-pin connector on the board surface for connection to a daughter card, and 5 jumpers.

The GE Series 6 Receiver Board DS3800HXRA also is populated with standoffs that enable a daughter card to be attached. The daughter card does not operate independently, instead it works with the board. It receives electrical power from the board and it receives signals from the board. The signals are processed by the daughter card. Other signals are transmitted back to the board. The daughter card provides added processing and functionality to board. The daughter card is attached to the standoffs. Each corner of the daughter card has a hole and the standoffs fit into the holes. Press the card into the standoffs until the daughter cards snap into place. The daughter card will be attached securely. The daughter card is populated with a short 40-pin ribbon cable. The ribbon cable attaches to the 40-pin connector on the board.

Becauses of the added weight and size of the board with the daughter card attached, use care when you install the board in the board rack. Slide the board into the rack but keep the board from scraping against the rack or other components located in the interior of the drive.

OTHER SUPERIOR PRODUCTS

 
Similar prodcut for GE

DS3800DDCD181A
DS3800DDCD18IA
DS3800DDCD18LA
DS3800DDCD1BIA
DS3800DDCD1BLA
DS3800DDCDI81A
DS3800DDCDI8IA
DS3800DDCDI8LA
DS3800DDCDIB1A
DS3800DDCDIBIA
DS3800DDCDIBLA
DS3800DDCDL81A
DS3800DDCDL8IA
DS3800DDCDL8LA
DS3800DDCDLB1A
DS3800DDCDLBIA
DS3800DDCDLBLA
DS380ODDCD181A
DS380ODDCD18IA
DS380ODDCD18LA
DS380ODDCD1B1A
DS380ODDCD1BIA
DS380ODDCD1BLA
DS380ODDCDIB1A
DS380ODDCDIBIA
DS380ODDCDIBLA
DS3800DDCD1B1A-A
DS3800DDCD1B1A-B
DS3800DDCD1B1A-C
DS3800DDCD1B1A-D
DS3800DDCD1B1A-E
DS3800DDCD1B1A-F
DS3800DDCD1B1A-G
DS3800DDCD1B1A-H
DS3800DDCD1B1A-I
DS3800DDCD1B1A-J
DS3800DDCD1B1A-K
DS3800DDCD1B1A-L
DS3800DDCD1B1A-M
DS3800DDCD1B1A-N
DS3800DDCD1B1A-O
DS3800DDCD1B1A-P
DS3800DDCD1B1A-Q
DS3800DDCD1B1A-R
DS3800DDCD1B1A-S
DS3800DDCD1B1A-T
DS3800DDCD1B1A-U
DS3800DDCD1B1A-V
DS3800DDCD1B1A-W
DS3800DDCD1B1A-X
DS3800DDCD1B1A-Y
DS3800DDCD1B1A-Z

Product Description

The DS3800DBIB is a small printed circuit board (PCB) designed as part of the Speedtronic (Mark IV) line manufactured by GE. The Speedtronic system is designed to sequence turbine fuel and to sequence turbine systems and their auxiliaries for startup. The Mark IV system is designed with a distributed control system which runs on an array of interconnected microprocessors. When one section of this gridwork fails, turbines will continue to work under the control of other parts of the system. In this way downtime is limited. The DS3800DBIB is designed specifically as an interface board.

The DS3800DBIB is a small daughterboard that works as a plug-in to another, larger PCB. It has been drilled out at the factory, one hole in each corner of the board. This board also has four connectors numbered 1 through 4. It has two small screw mounts covered by black tabs. The first mount is marked C101 and is positioned next to a ring marked TP1. The second is not marked and positioned next to a ring marked TP2. The DS3800DBIB has one capacitor rated 708A1, M/E 200V 1.0 +10%. It also has one blue potentiometer located on the edge of the board that is wired for variable resistance. There are ten resistors and six small capacitors marked 'cr' on the DS3800DBIB PCB

 
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
 
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
 
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
 
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.