Place of Origin: | Japan |
Brand Name: | OMRON |
Model Number: | S8VK-X48024A-EIP |
Minimum Order Quantity: | 1 |
---|---|
Price: | 1 |
Packaging Details: | New in original boxRockwell Automation |
Delivery Time: | 5-8 work daysRockwell Automation |
Payment Terms: | T/T |
Supply Ability: | 1 |
Condition: | New | Rated Torque: | 1.3 Nm |
---|---|---|---|
Peak Torque: | 3.65 Nm | Warranty: | 1 Year |
Encoder Resolution: | 13 Bit | Power - Rated: | 2kW |
RPM: | 3000 RPM | Voltage - Rated: | 200VAC |
OMRON S8VK-X48024A-EIP 100 to 240 VAC Power rating 480 W 24 VDC - 40 C to + 70 C
Product information OMRON S8VK-X48024A-EIP :
More information:
• EMI (radiated emissions) conform to Class B when this Power Supply is installed in a control panel.
• EN/IEC 61558-2-16 The S8VK-X was designed based on EN/IEC 61558-2-16. Currently, IEC 61558-2-17 has been replaced by IEC 61558-2-16. When certification was received for EN/IEC 60204-1 (Machinery Safety), it was necessary to go through a control transformer to the control circuits. However, a control transformer is not always necessary for product that have been certified for the safety standard for OVCIII or for product that use a transformer that conforms to EN/IEC 61558-2-16.
• Safety Standards for a DC Input When DC is used, UL 60950-1, UL 62368-1, cUR (CSA 22.2 No. 60950-1), cUR (CSA C22.2 No. 62368-1), EN/IEC 60950-1, EN/IEC 62368- 1, EN 50178 and EN/IEC 61558-2-16 are applicable to safety standards. Safety standard compliance is achievable by connecting a UL-certified fuse as specified below. Select an external fuse that satisfies the following conditions: S8VK-X03005-EIP, S8VK-X06012-EIP, S8VK-X06024-EIP (350 VDC or more, 6 A) S8VK-X09024@-EIP, S8VK-X12024@-EIP, S8VK-X24024@-EIP (350 VDC or more, 8 A) S8VK-X48024@-EIP (350 VDC or more, 12 A)
• To comply with PELV output requirements for EN/IEC 60204-1, ground the negative side of the output (-V) to a protective earth (PE).
Output | Rated output current | 20 A |
---|---|---|
Output voltage variable range | 21.6 to 28 V (With V.ADJ) | |
Rated output power | 480 W | |
Maximum peak current | 30 A | |
Ripple | 130 mV(p-p) max. at 20 MHz | |
Static input variation influence | 0.5% max. | |
Static load variation influence | 1.5% max. | |
Ambient temperature variation influence | 0.05%/℃ max. | |
Start up time | 1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input) |
|
Hold time | 25 ms typ. (at 115 VAC input) 25 ms typ. (at 230 VAC input) |
|
Additional functions | Overload protection | Yes, automatic reset, intermittent operation type |
Overvoltage protection | Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again) | |
Series operation | Yes (Up to 2 Power Supplies with external diode) | |
Parallel operation | Yes (Up to 2 Power Supplies) | |
Alarm indication | Yes (color: red) | |
Output indicator | Yes (color: green) | |
Output voltage indication | Yes | |
Output current indication | Yes | |
Peak-hold current indication | Yes | |
Total run time monitor | Indication: Yes |
Same series of R88 - :
R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W
R88M-G40030H-BS2 : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200 VAC, 3000 rpm, 1.3 Nm, with brake
R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental, Brake, with circular connector
R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake
R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
Details:
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
Contact Person: Ms. Harper
Tel: 86-13170829968
Fax: 86--25020661