 |
| Place of Origin: | USA |
| Brand Name: | FANUC GE |
| Model Number: | A06B-2115-B103 |
| Price: | negotiation |
|---|---|
| Packaging Details: | New in original boxRockwell Automation |
| Delivery Time: | 5-8 work daysRockwell Automation |
| Payment Terms: | T/T |
| Supply Ability: | 1 |
| Condition: | New | Nominal Output Voltage: | 120 / 240 VAC |
|---|---|---|---|
| Product Type: | Input Module | Warranty: | 1 Year |
| Memory Requirement: | 16 Bytes | Rated Voltage: | 11 Watts |
| Output Voltage Range: | 5 Volts DC And 3.3 Volts DC | Communication Rate: | 16 Outputs |
FANUC GE A06B-2115-B103 AC SERVO MOTOR BIS0.5/6000 B64IA 50/60 HZ 3 PHASE CNC
Product information GE A06B-2115-B103 :
A fine acceleration/deceleration time constant of about 16 is optimal for fine acceleration/deceleration, position feed-forward, and velocity feed-forward cutting. In rapid traverse, however, the setting of a time constant of 32 to 40 ms may be desirable to reduce a shock at the time of acceleration/deceleration. Note that the feed-forward coefficient for figure minimization in cutting is not always the same as the feed-forward coefficient for minimizing time for high-speed positioning by rapid traverse. In such a case, use the cutting feed/rapid traverse switchable fine acceleration/deceleration function.
1. When this function is used, high-frequency vibration can occur, depending on the resonance point of the machine system. In this case, stop the use of this function. If high-frequency vibration occur when a high velocity loop gain is set, use the torque command filter.
2 . Instead of fine acceleration/deceleration, linear acceleration/deceleration after interpolation on the CNC can be used. During batch transfer, do not use fine acceleration/deceleration, but use acceleration/deceleration after interpolation on the CNC software side.
3 . For rapid traverse, a time constant of about 40 to 64 ms is required to perform high-speed positioning by fine acceleration/deceleration plus feed-forward. In this case, use the cutting feed/rapid traverse switchable fine acceleration/deceleration function
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
Contact Person: Ms. Harper
Tel: 86-13170829968
Fax: 86--25020661
