MDDLN55SE Industrial Servo Drives Panasonic 3-Phase 200 V A6SE Series

Spec Detail

Specifications

• Input power: Main circuit Single/3-phase 200 to 240V +10% -15% 50/60 Hz
• Input power: Control circuit Single phase 200 to 240V +10% -15% 50/60 Hz
• Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
• About Encoder feedback * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings).
• Parallel I/O connector:
• Control signal Input General purpose 10 inputs
• The function of general-purpose input is selected by parameters.
• Parallel I/O connector:
• Control signal Output General purpose 6 output
• The function of general-purpose output is selected by parameters.
• Parallel I/O connector:
• Analog signal Output 2 outputs (Analog monitor: 2 output)
• Parallel I/O connector:
• Pulse signal Input 2 inputs (Photo-coupler input, Line receiver input)
• Parallel I/O connector:
• Pulse signal Output 4 outputs (Line driver: 3 output, open collector: 1 output)
• Communication function USB
• Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
• Regeneration Built-in regenerative resistor (external resistor is also enabled.)
• Control mode Switching among the following 3 mode is enabled,
• (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command