OMRON R88G-HPG32A45400B 10 to 60 Hz and at an acceleration of 5.88 m/s2 or less

OMRON R88G-HPG32A45400B 10 to 60 Hz and at an acceleration of 5.88 m/s2 or less

1. The values outside parentheses indicate the rated value, and the values inside parentheses indicate the range of
acceptable variation.

2. Select a DC power supply in consideration of the current values that are specified in the current consumption. The rated
current value that is printed on the product nameplate is a condition to apply the 1S-series product for the UL/Low
Voltage Directive.
Therefore, you do not need to consider it when you select a DC power supply for each model.

3. This is the maximum heating value in applicable Servomotors.
Refer to Relationship between Servo Drive, Servomotors and the Main Circuit Heating Value on below for the heating
value of each applicable Servomotor.

4. It is a hold time at momentary power interruption. Use a DC power supply to fulfill the following conditions so that the
power supply of the control circuit is held during momentary power interruption.
Reinforced insulation or double insulation, and the output hold time of 10 ms or more
 

More information: 

Omron has developed a new and exciting family of compact power supplies. With the same high quality and practical design that made our previous Series safe, reliable, and easy to install, the new S8VK Series is even tougher, more compact and easier to use.

The S8VK Series not only offers you greater flexibility when designing your machine, it also saves you time and reduces costs thanks to the minimal wiring requirements and easy one-handed mounting provided by the enhanced DIN-rail mounting clip.

To ensure that they provide the perfect solution to match every customer’s need, Omron has launched 4 different families: the cost effective S8VK-C, the standard with single-phase input S8VK-G, the standard with three-phase input S8VK-T, and the redundancy unit S8VK-R.

Designed to international safety standards for global markets, the S8VK even has approvals for marine applications (S8VK-G/T/R) and carries an across-the-board, warranty on all models no matter which country your machine is exported to! Because of high MTBF figures, your S8VK will keep running in stable condition for a long term.

Same series of R88 - :

R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W

R88M-G40030H-BS2  : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200 VAC, 3000 rpm, 1.3 Nm, with brake

R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental, Brake, with circular connector

R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake

 

R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
 

R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
 

Our brand:

【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor

(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)