 |
| Place of Origin: | Japan |
| Brand Name: | OMRON |
| Model Number: | R88M-GP10030L |
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | 1 |
| Packaging Details: | New in original boxRockwell Automation |
| Delivery Time: | 5-8 work daysRockwell Automation |
| Payment Terms: | T/T |
| Supply Ability: | 1 |
| Condition: | New | Rated Torque: | 1.3 Nm |
|---|---|---|---|
| Peak Torque: | 3.65 Nm | Warranty: | 1 Year |
| Encoder Resolution: | 13 Bit | Power - Rated: | 2kW |
| RPM: | 3000 RPM | Voltage - Rated: | 200VAC |
OMRON R88M-GP10030L 100W100V3KRPM INC FLT G-SRVMTR Speed Control Torque Control.
Product information OMRON R88M-GP10030L :
1. These are the values when the Servomotor is combined with a Servo Drive at room temperature (20°C, 65%). The
maximum momentary torque shown above indicates the standard value.
2. Applicable Load Inertia:
• The operable load inertia ratio (load inertia/rotor inertia) depends on the mechanical configuration and its rigidity.
For a machine with high rigidity, operation is possible even with high load inertia. Select an appropriate motor and
confirm that operation is possible.
• If the dynamic brake is activated frequently with high load inertia, the dynamic brake resistor may burn. Do not
repeatedly turn the Servomotor ON and OFF while the dynamic brake is enabled.
• The dynamic brake is designed only for emergency stops. Design the system so that the Servomotor remains
stopped for at least 3 minutes after applying the dynamic brake. Otherwise the dynamic brake circuits may fail.
3. The allowable radial and thrust loads are the values determined for a service life of 20,000 hours at normal operating
temperatures. The allowable radial loads are applied as shown in the following diagram.
The amplitude may be amplified by mechanical resonance. Do not exceed 80% of the specified value for extended
periods of time.
Note: 1. Do not use the cable when it is laying in oil or water.
Note: 2. Do not expose the cable outlet or connections to stress due to bending or the weight of the cable itself.
Note: 3. Always disconnect all connections to the Servo Drive before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure to follow this precaution may result in
damaging internal elements.
Same series of R88 - :
R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W
R88M-G40030H-BS2 : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200 VAC, 3000 rpm, 1.3 Nm, with brake
R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental, Brake, with circular connector
R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake
R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
| R88M-G10030L | R88M-G20030L |
| R88M-G10030H-Z | R88M-G20030H-Z |
| R88M-G40030H-Z | R88M-G05030H-B-Z |
| R88M-G10030L-B | R88M-G20030L-B |
| R88M-G10030H-B-Z | R88M-G20030H-B-Z |
| R88M-G40030H-B-Z | R88M-G05030H-S2-Z |
| R88M-G10030L-S2 | R88M-G20030L-S2 |
| R88M-G10030H-S2-Z | R88M-G20030H-S2-Z |
| R88M-G40030H-S2-Z | R88M-G05030H-BS2-Z |
| R88M-G10030L-BS2 | R88M-G20030L-BS2 |
| R88M-G10030H-BS2-S | R88M-G20030H-BS2-Z |
| R88M-G40030H-BS2-Z | R88M-GP10030L |
| R88M-GP20030L | R88M-GP10030H-Z |
| R88M-GP20030H-Z | R88M-GP40030H-Z |
| R88M-GP10030L-B | R88M-GP20030L-B |
| R88M-GP20030L-B | R88M-GP20030H-B-Z |
| R88M-GP40030H-B-Z | R88D-GT01H-Z |
| R88D-GT02H-Z | R88D-GT04H-Z |
| R88D-GT08H-Z | R88M-GP10030L-S2 |
| R88M-GP20030L-S2 | R88M-GP10030H-S2-Z |
Details:
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
Contact Person: Ms. Harper
Tel: 86-13170829968
Fax: 86--25020661
