JP Yokogawa Dp Transmitter EJA110E-JMS5G-924DJ/KS21/M01/T12/N4/JH01

  EJA110E-JMS5G-924DJ/KS21/M01/T12/N4/JH01 Differential Pressure Transmitter
  
Product Information Of : EJA110E-JMS5G-924DJ/KS21/M01/T12/N4/JH01

General info :

Article number : EJA110E-JMS5G-924DJ/KS21/M01/T12/N4/JH01

Catalog Description : EJA110E-JMS5G-924DJ/KS21/M01/T12/N4/JH01 DP Transmitter

Invoice Description : EJA110E- DP Transmitter

Product type : Differential Pressure Transmitter

Minimum Order Quantity : 1 piece

Technical :   

J - Output Signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

M - Measurement Span (Capsule) : 1 to 100 kPa (4 to 400 inH2O)

S - Wetted Parts Material : 316L SST

5 - Bolt & Nuts Material : 316L SST

G - Process Connection : Without process connector (1/4 NPT female on the cover flanges)

9 - Installation : Horizontal piping and left side high pressure

2 - Amplifier Housing : ASTM CF-8M stainless steel

4 - Electrical Connection : M20 female, two electrical connections without blind plugs

D - Integral Indicator : Digital indicator

J - Mounting Bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

KS21 - ATEX : ATEX Intrinsically safe Approval *1 *3 Applicable Standard: EN 60079-0, EN 60079-11 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85°C T100°C T120°C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: –50 to 60°C (–58 to 140°F) Maximum Process Temp. (Tp) for EPL Ga:120°C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 µH Amb. Temp. for EPL Db: –30 to 60°C *2 Max. surface Temp. for EPL Db: T85°C (Tp: 80°C), T100°C (Tp: 100°C), T120°C (Tp: 120°C)

M01 - Material certificate : Cover flange

T12 - Pressure test/ Leak test certificate : Test Pressure: 16 MPa(2300 psi), Nitrogen Gas, Retention time: one minute

N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

Categories : 

Does not supply

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
   Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
   We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
   We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
   The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:  

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.