EI812F 3BDH000021R1 ABB Ethernet Communication Module
Description
This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose.
Trademarks ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered trademarks of their respective holders. Warranty Please inquire about the terms of warranty from your nearest ABB representative
The data, examples and diagrams in this manual are included solely for the concept or product description and are not to be deemed as a statement of guaranteed properties. All persons responsible for applying the equipment addressed in this manual must satisfy themselves that each intended application is suitable and acceptable, including that any applicable safety or other operational requirements are complied with. In particular, any risks in applications where a system failure and/or product failure would create a risk for harm to property or persons (including but not limited to personal injuries or death) shall be the sole responsibility of the person or entity applying the equipment, and those so responsible are hereby requested to ensure that all measures are taken to exclude or mitigate such risks
This product has been designed to be connected and communicate data and information via a network interface which should be connected to a secure network. It is the sole responsibility of the person or entity responsible for network administration to ensure a secure connection to the network and to take the necessary measures (such as, but not limited to, installation of firewalls, application of authentication measures, encryption of data, installation of anti virus programs, etc.) to protect the product and the network, its system and interface included, against any kind of security breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information. ABB is not liable for any such damages and/or losses.
The CPU board contains the microprocessor and RAM memory, a realtime clock, LED indicators, INITpush button, and a CompactFlash interface.
The base plate of the PM866 / PM866A controller has two RJ45
Ethernet ports (CN1, CN2) forconnection to the Control Network,and two RJ45 serial ports (COM3, COM4).
One of the serial ports(COM3) is an RS-232C portwith modemcontrol signals,whereas the other port(COM4) is isolated and used for the connection of aconfiguration tool.
The controller supports CPU redundancyforhigher availability(CPU, CEX-Bus,communication interfaces and S800 I/O).
Simple DIN rail attachment / detachment procedures, using theunique slide & lock mechanism. All base plates are providedwith aunique Ethernet address which provides every CPUwith a hardware identity.
The address can be found on the Ethernet address label attached to the TP830 base plate.
ISA Secure certified – Read more Reliability and simple fault diagnosis procedures Modularity, allowing for step-by-step expansion IP20 Class protection withoutthe requirementfor enclosures
The controllercan be configuredwith 800xA control builder
The controller has full EMC certification Sectioned CEX-Bus using a pair of BC810 / BC820 Hardware based on standards for optimumcommunication connectivity(Ethernet, PROFIBUS DP, etc.)
Built-in redundant Ethernet Communication ports
We have the same series of models in stock. If you don’t find the model you need, please contact us and we will provide you with an official quotation!
Additional Information
Medium Description: For use together with PM 802F or PM 803F for Freelance rack based I/O, 3 channel.
Product Type: Communication_Module
Ordering
851762-- Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading 84.43, 85.25, 85.27 or 85.28.- Other apparatus for transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network) :-- Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus
Customs Tariff Number:85176200
Dimensions
Product Net Depth / Length: 125 mm
Product Net Height: 155 mm
Product Net Weight: 0.145 kg
Environmental
RoHS Status: Not RoHs Compliant
WEEE Category: 5. Small Equipment (No External Dimension More Than 50 cm)
SCIP: No SVHC present Malta (MT)
FAQ:
Q: What is the brand name of the product?
A: The brand name of the product is ABB.
Q: What is the model number of the product?
A: The model number of the product is EI812F 3BDH000021R1.
Q: Where is the product manufactured?
A: The product is manufactured in FI.
Q: What are the available payment terms?
A: The available payment terms are T/T, Western Union, and PAYONEER.
Q: What is the delivery time for the product?
A: The delivery time for the product is 3-5 days.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
Your message must be between 20-3,000 characters!
