STD924-A1A-00000-HC,WP,1C+XXXX Series 900 Differential Pressure Transmitter 1/4NPT 4500PSI

 STD924-A1A-00000-FF,WP,1C+XXXX Series 900 Differential Pressure Transmitter 1/4NPT 4500PSI

 
Product Information Of : STD924-A1A-00000-FF,WP,1C+XXXX

STD924 : 0-4" to 0-400" H2O / 0-10 to 0-1,000 mbar Body Rating: 4,500 psi (310 bar)

A : Process Wetted Heads: Carbon Steel ; Vent/Drain Valves and Plugs2: 316 SS ; Barrier Diaphragms: 316L SS

1 : DC® 200 Silicone

A : 1/4 NPT

00000 : No Selection

FF : FOUNDATIONTM Fieldbus Communications

WP : Write Protection (Delivered in the "enabled" position)

1C : Approval Type    ;     Location or Classification

       Explosion Proof : Class I, Div. 1, Groups A,B,C,D

       Dust-Ignitionproof : Class II, III Div. 1, Groups E,F,G

       Non-Incendive : Class I, Div. 2, Groups A,B,C,D

       Intrinsically Safe : Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G

XXXX : Factory Identification

Note : 

1, Base STD models no longer include a default communications option. All units now require the selection of a communication option from            Table III (AN, DE, HC, H6 or FF).

2, Carbon Steel heads are zinc-plated and not recommended for water service due to hydrogen migration. For that service, use 316 stainless        steel wetted Process Heads

3, Vent/Drains are sealed with Teflon® or PTFE

Introduction : 

● Make one selection from each Table (I, II and IV), using the column below the proper arrow.

● Select the desired Key Number. The arrow to the right marks the selection available.

● A (●) denotes unrestricted availability. A letter denotes restricted availability.

● Select as many Table III options as desired plus a communications option selection.

● Restrictions follow Table IV

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
   Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
   We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
   We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
   The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:  

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.