GE FANUC IC693MDL655 TYPICAL SCAN RATE SERIES 90-30 PROCESSOR MODULE
Technical Specifications for IC693MDL655
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part Number IC693MDL655
Product Description Discrete input module
Module Type Discrete I/O
No of Channels Thirty-Two (32)
No. of groups Four (4)
Power Type DC
Input Voltage range 0-30 VDC
No. of channels per group Eight (8)
Input Current (mA) 7
Wiring configuration Positive / Negative logic
Response Time (ms) 2 on/2 off
Input signal range 0-30 VDC
number of points 32
Nominal Input voltage 24 VDC
Trigger Voltage 11.5-30 Volts
Input current 7 mA per channel
Product Lifecycle Status* Discontinued/Obsolete
Current draw 195 mA @ 5VDC; 224 mA @ 24 VDC
On State Voltage 11.5 - 30.0 VDC
Off state voltage 0-5 VDC
On state current 3.2 mA
Off state current 1.1 mA
On response time, typical 2 ms
On response time, maximum 2 ms
Product Lifecycle Status Discontinued/Obsolete
About IC693MDL655
The IC693MDL655 is a High-density, digital input module that is part of Emerson Automation’s Series 90-30 Programmable Logic Controller
(PLC) platform. This input module is designed to be installed to any Series 90-30 baseplate whether CPU baseplate, I/O Expansion baseplate
or Remote I/O baseplate. It is directly mounted to any available I/O slot of a 5-slot or 10-slot baseplate and occupies single sot only. Additionally,
this module is compatible for use with embedded 90-30 CPUs and modular 90-30 CPUs.
Being a high-density input module, it features Thirty-Two (32) input points, grouped in Four (4) with Eight (8) inputs per group. Each channel is
compatible to be wired with On/Off type of devices that operate at voltage signal range of 0-30 VDC and nominal voltage of 24 VDC. Typical
On/Off devices used with this module are limit switches, level switches, proximity switches, auxiliary contacts, pushbutton devices and other
devices that are operating similarly.
Unlike other digital input modules, the IC693MDL655 uses Two (2) male 24-pin type connectors with ordering number Fujitsu FCN-365P024-AU.
This is pre-mounted on the front panel of the module that interfaces to input groups A, B, C and D. This requires use of pre-wired cables which
are separately purchased. Compatible pre-wired cables are IC693CBL327 and IC693CBL328. Additionally, this cable can be custom built.
The IC693MDL655 is also provided with LED status indicators that with group identifiers as well. LED indicators are labelled as A1-A8 (Group 1);
B1-B8 (Group 2); C1-C8 (Group 3) and D1 - D8 (Group 4).
The IC693MDL655 module is a 24 Volts DC input module. This module features positive or negative logic and it comes with 32 input points
which are divided into 4 groups of 8 inputs each. The IC693MDL655 module features an input voltage range of 0 to 30 Volts DC. The isolation
is rated as 1500 Volts between the field side and the logic side. The input current rate is 7.0 milliamps of typical ON current at 24 Volts DC.
The on-state voltage is 11.5 to 30 Volts DC while the off-state voltage is 0 to 5 Volts DC. The on/off response time is indicated as 2 milliseconds
maximum. The IC693MDL655 module’s backplane isolation between the field side and the logic side is provided by the OptoCouplers on the
module.
Connections to the IC693MDL655 module’s input circuits is made from the user’s input devices to 2 male 24-pin connectors, which are mounted
on the front of the module. The external input devices include the proximity sensors, the pushbuttons, and the BCD thumbwheels.
Your message must be between 20-3,000 characters!
